How to disable back panel audio output while you plug in an ear phone on front panel

Procedures

1. Refer to the pin definition in user manual, connect F_AUDIO1 header on the motherboard to the front panel of the case.
2. Install “Audio Driver” under Windows OS.
3. Double-click the “Audio Manager” icon on the windows taskbar.
   



4. In the popped-out Audio Manager, click the front panel audio output controller as marked in following image.



5. The defaulted selection in “Connected device” is “Line Out”, as following image:



6. Change the selection to Headphone manually, as shown below.



7. Click “OK” to confirm and exit the Audio Manager.
8. When users want to use the audio jack on the back panel instead of the front panel, just change the option back to “Line Out” in the “Connected device” dialog box.